Live Edge Fireplace Mantel

How do I install the Live EDGE on my fireplace mantel?

What is a live edge fireplace mantel?

Live” means the edge appears to be natural and untouched. Mantels on this page can be between 3″ to 12″ in thickness. These sizable accent pieces are ideal for open areas with high ceilings and lots of natural lighting.

How do you make a live edge mantel?

Does cedar make a good mantel?

Cedar is a knotty softwood so it's soft enough to work with easily but durable enough for a mantel shelf. Northern white cedar and aromatic red cedar is indigenous to North America and not endangered, so the wood is widely available in several forms suitable for mantel shelves.

How do you secure a mantel to a brick fireplace?

How thick should a floating mantel be?

A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.

How do you attach a mantel to a brick fireplace?

Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.

How do you make a floating mantel?

How do you attach a floating mantel to a stone fireplace?

How do you float a mantle?

Are wood mantels safe?

The primary goal is to help you avoid creating unsafe situations that can result in a fire burning your home and possibly causing the loss of life. The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening.

How do you finish a live edge with bark on a slab?

Will a wood mantel catch fire?

Combustibles aslo include wood trim, mantels, framing and any other object that can catch fire and burn. Fireplaces must be properly installed with adequate clearances to avoid chemical decomposition caused by heat in a process known as pyrolysis.

How thick should a mantel be?

A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.

How long are most fireplace mantels?

A safe route is to make it 12” longer than the fireplace box. For instance, if your fireplace box is 42” then you would order a 56” long mantel. The majority of mantels we sell are from 66”-78”, but we make every mantel custom to your unique space.

What is the best height for a fireplace mantel?

An ideal mantel height should range between 4 and 6 feet from the floor. A 6-foot mantel height is the right size for a larger room, but in a smaller room, it can take over the space. For smaller rooms, a 4.5-foot mantle would be a better choice.

How do you size a mantel?

Width: The mantle should be wider than the fireplace — typically 3 to 6 inches wider than the firebox on each side. You can choose to go wider, but it's best to keep the mantel width proportionate to the room size and the fireplace. Height: The standard mantel height is about 4-1/2 feet above the hearth's floor.

How do you finish a cedar mantle?

  • Use a sanding block or belt sander to sand the raw cedar fireplace mantle.
  • Apply a layer of oil based stain using a rag or sponge.
  • Use a small paintbrush to brush on a layer of a polyurethane protective coat.
  • How do you hang a cedar mantel?

    How do you attach wood to brick without drilling?

    The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.

    Do you install mantel before or after stone?

    If you'd like to have a mantel, it is ideally installed in conjunction with the stone veneer so this decision should be made along with the selection of your stone. There are several different materials that can be used to create a mantel, such as stone, painted wood, or natural or stained wood.

    Are fireplace mantels hollow?

    Lower cost fireplace mantels are more likely to be hollow compared to mantels made from higher quality materials. Timber mantels are also more likely to be hollow compared to mantels made from other materials.

    How far above the mantle should a TV be mounted?

    One of the most popular questions clients pose to interior designers is how high to mount their flat-panel TVs. In general, the answer is 60-68 inches above the ground; however, this number will vary depending on the height of the homeowner.

    Should mantel be wider than fireplace?

    Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.

    Should mantel be wider than TV?

    For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. In our experience, the fireplace should be a little wider (6-8 inches) than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace.

    How do you secure a fireplace mantel to the wall?

    Is it OK to mount TV over gas fireplace?

    The short answer is – yes. However, to ensure your television isn't damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.

    How do you make a cheap mantel?

    How do you make a homemade mantel?

    How do you make a simple mantel?

    Can you add a mantel to a stone fireplace?

    With stone fireplaces, it's important to find a mostly flat section to securely mount the cleat and the mantel to. it's possible a stone might stick out proud of the mantel and make it more challenging to mount the cleat. In that case, it usually makes sense to go a little higher.

    How do you install a wood mantel on a stone fireplace?

  • Locate the studs behind the brick, stone, or faux veneer.
  • Drive 1/2in lag screws through each of the studs.
  • Have a helper support the mantel while you mark the location of the support rods on the back of the beam.
  • Apply construction adhesive into the holes.
  • Slide into place, admire, and enjoy!
  • How do you hang a mantel on a stone fireplace?

  • Drill a hole in the stone fireplace using a mason drill bit.
  • Cut the rebar to size.
  • Fill hole with Fuz It (liquid nail)
  • Insert the rebar into the hole on the stone and hold in place to allow liquid nail to grab rod.
  • Allow to dry for 48 hours before hanging mantel.
  • How do you hang a floating mantel on drywall?

    How do you mount hollow mantel?

    What is code for a mantel above a fireplace?

    As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.

    What is code for mantle above fireplace?

    Most codes specify mantel distance from the firebox itself. As a general rule, a mantel is placed about 12 inches above the fireplace opening. Add an inch to the distance for every inch that the mantel protrudes. So, a mantel 6 inches deep would be attached 18 inches above the firebox opening.

    How do I protect my fireplace mantel from heat?

    A heat deflector is installed to provide air space between it and the wood mantel, and it's bent at a 45 degree angle to deflect heat away from the mantel. It turned out great! It does its important job and is barely noticeable.

    Can I leave bark on live edge?

    Removing the bark on a live edge slab is a pretty simple process. We typically use a small chisel and hammer and angle the chisel with the way the live edge tapers. After all of the big pieces are removed, you can sand the rest until your edge has a smooth surface.

    Should I take the bark off live edge wood?

    Do you remove bark from live edge?

    Do fireplace mantels get hot?

    The area around the fireplace will naturally get very hot. This is why you shouldn't hang any sensitive items above the fireplace. If it's a gas fireplace, you should check your fireplace manual to make sure your installer used the proper clearances. If it's wood, you should get an inspection done.

    Can you put wood around fireplace?

    Is Wood Safe for Fireplaces? International Residential Code, a model code adopted by many municipalities, does allow for combustible materials, such as wood sheathing, to be placed directly on fireplace surrounds. However, all combustibles must remain at least 6 inches from the opening.

    Can you get a fireplace too hot?

    How hot is too hot when it comes to wood fire stoves and fireplaces? Anything over 800°F is starting to get too hot and could damage your wood stove or fireplace. Some types of wood, if they are let to burn at full force can heat up a fireplace too hot.

    How thick should a live edge mantel be?

    Most live edge style mantels are around 3.5 to 4 inches thick. There are five common styles of mantels that are popular to make.

    A mantel should stick out at least 6 inches (15.24cm) from the wall. It's the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don't recommend having it less than 6 inches (15.24cm).

    Cedar is a knotty softwood so it's soft enough to work with easily but durable enough for a mantel shelf. Northern white cedar and aromatic red cedar is indigenous to North America and not endangered, so the wood is widely available in several forms suitable for mantel shelves.

    Author: james

    Leave a Reply

    Your email address will not be published.